6
SETUP
CONNECTION MODES
INITIALIZATION
1 Turn on your Stratus+ by pressing and holding the Home Button (6).
2 All four Player Indicator LEDs (3) will ash to indicate your
SteelSeries Stratus+ is in pairing mode.
3 To pair your Stratus+ to your Android device, go to Settings →
Bluetooth. “Stratus+” will be displayed on the screen. Tap to Connect.
SWITCHING BETWEEN WIRELESS AND WIRED MODE
The Stratus+ has an auto-detect feature to go into wired or wireless mode
when rst searching for a connection. But if you are already connected
wired or wirelessly and want to switch to the other mode, follow these
steps:
If the Stratus+ is wirelessly connected and you want to switch to wired
mode:
1 Use the USB-A to USB-C Play and Charge Cable (14) to connect
the controller to the device you want to connect to in wired mode.
2 Simultaneously press and hold down the Back/Select Button (2) and
the Forward/Start Button (4) for 2 seconds.
3 The LED pattern change will indicate that the controller switched from
wireless to wired mode.
If the Stratus+ is connected via wired USB-C to another device and you
want to switch to wireless mode:
Android
To Next Page
Loading...
