MODEL: SRP025
2-Speed Portable Record Player
INSTRUCTION MANUAL
Ver3
(Please read before use)
910-121141-0060-100
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment
at the time of disposal will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health and the environment.
For more information about where you can drop off your waste equipment
for recycling, please contact your Local Authority Office, your household
waste disposal service or the shop where you purchased the product
Instructions for Disposal of Waste Equipment by Users in Private Households
SPECIFICATIONS
Power Source : 12V AC/DC Adaptor (supplied)
Speakers : 4”; 2 x 1.5W RMS; 20W
p.m.p.o.; 4 Ohm
Turntable : 2-speed - 33
1
/
3
/ 45 rpm
Line-Out : 3.5mm dia. (Auxiliary cable not supplied)
Line-In : 3.5mm dia. (Line-in cable supplied)
Subwoofer Output Jack : 3.5mm diameter Jack for Active Subwoofer
Stylus : Universal type fitted (for 33
1
/
3
/ 45 rpm records*)
Accessories supplied : 45rpm Spindle Adaptor; Speaker Connection Cable;
Line-in cable; DC Adaptor
*Please contact your Dealer or Steepletone UK Ltd (01869 – 810081) for details on how to
purchase a replacement stylus (code: SSTY1) or Stylus Cleaning Kit (code: SBSK1)
**DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE**
IMPORTANT PRODUCT INFORMATION
If you find your unit switches itself off regularly, this is not a fault.
Due to the ErP Stage 2 requirements for power saving measures, a unit which is connected to
the mains power will switch itself off automatically if no music has been playing for over 15 minutes.
Turn the ON/OFF SWITCH to OFF and after about 5 seconds to ON again to re-activate the unit.
ErP2 – NEW EUROPEAN DIRECTIVE – FROM JANUARY 2013
The Energy-related Products Directive ErP2 impacts all energy-related products sold within the EU.
To improve energy efficiency and environmental protection, the ErP2 Directive, which is a European legislation
as part of CE marking, applies to products that affect energy consumption during use.
From January 2013 this Directive requires Manufacturers and / or Importers to offer products designed to
reduce their overall impact on the environment, including the resources consumed during use, manufacture
and disposal.
To Next Page
Need help?
General
