Steinbach BP-39WS-B Mini - Preparing the installation site

2. Clean all of the parts included in the scope of delivery as described in the chapter on
“Cleaning”.
The device is now clean and ready for use.
Preparing the installation site and the connections
A good choice and preparaon of the installaon site makes it signicantly easier to
install and operate the heat pump. The following requirements must be met or
considered:
- An installaon site outdoors
- Protecon from ooding, heavy rain or irrigaon systems
- Stable, level and waterproof ground
- Required minimum distances to walls or objects (see Fig. E)
- Required minimum distance of 2 m to the swimming pool
- Easy connecon to the water pipes
- Easy connecon to the power supply
- Easy access to the display
- An opon to drain condensate
- Environment insensive to vibraons and sound
For even more ecient use of the heat pump, we addionally recommend
our Steinbach bypass set (item no. 060045).
49
en