Steinbach BP-39WS-B Mini - Technical data specifications

Problem Possible cause Remedy
Display: error message P1 The temperature sensor at
the inlet is defecve or
does not emit a signal.
Contact an authorized qualied
person.
Display: error message P3 The temperature sensor at
the heat exchanger is
defecve or does not emit
a signal.
Contact an authorized qualied
person.
Display: error message P5 Pressure in refrigerant
circuit is too low.
Contact an authorized qualied
person.
Display: error message P6 Insucient water ow. Increase the water throughput of
the hydraulic circuit that supplies
the heat pump.
Contact an authorized qualied
person.
If the problem persists, contact the customer service listed on the last page.
Technical data
Model: BP-39WS-B Mini
Item number: 049275
Total weight (net/gross): 19 kg / 21 kg
Dimensions (W x H x D): 365 mm × 370 mm x 320 mm
Heang output *: 3.9kW
Heang input power *: 0.65kW
Input power rang: 0.85kW
Heang input current *: 3.3A
Operang voltage and frequency **: 220 – 240 V~, 50 Hz
Coecient of performance (COP): 6.0
Protecon class: I
Protecon type: IPX4
Sound power level: 47 dB(A)
Heat exchanger material: Titanium in PVC
63
en