Steinbach Classic 310 - Technical Data; Classic 310 Technical Data; Classic 400 Technical Data

There is lter medium in the
pool
Quartz lter sand was
topped up.
Backush the system unl the
water runs clear. See secon
"Backushing".
Defecve screens in the
lter vessel.
Check the screens for damage and
replace if necessary.
If the problem cannot be solved, contact the customer service listed on the last page.
Technical data
Classic 310 technical data
Model Classic 310
Arcle number 040310
Filter pump model SPS 50-1; art. no. 040921
Circulaon rate 4,500 l/h
Type of pump self-priming with prelter
Max. water temperature 35°C
Power supply 220-240 V~ 50/60 Hz
Output 250 W
Design 7-way valve with manometer
Vessel Ø 320 mm
Connecon Ø 32/38 mm
Pump installaon on base plate
Required quanty of lter balls approx. 560 g
Required quanty of quartz lter sand approx. 20 kg, DIN EN 12904
Recommended grain size 0.7 to 1.2 mm
Suitable for pools up to 22,000 l of water content
Classic 400 technical data
Model
Classic 400
Arcle number 040340
Filter pump model SPS 70-1; art. no. 040920
Circulaon rate 6,600 l/h
Type of pump self-priming with prelter
61