To Next PageTo Next Page
Need help?Do you have a question about the Steinbach Speed Clean Classic 300 and is the answer not in the manual?
List of spare parts for the Speed Clean Classic sand filter system with part numbers.
Critical warnings and safety precautions for product operation and handling.
Core operational procedures and requirements for the filter system.
Specifications and type of sand required for the filter system.
Steps for assembling the filter pump and tank components.
Instructions for inserting filter fingers and filling the tank with sand.
Connecting hoses for skimmers, pump, and pool return.
Reverses water flow to clean the filter sand and remove debris.
Standard filtration mode for pool water cleaning.
Mode used after backwashing to clean the filter bed.
Electrical connection safety and requirements for the filter system.
Common issues, causes, and solutions for filter system problems.
Guidance on filter sand replacement and general cleaning procedures.
Proper procedures for storing and disposing of the filter system and packaging.
General| Type | Sand filter system |
|---|---|
| Tank size | 300 mm |
| Connection | 32/38 mm |
| Connection Size | 32/38 mm |
| Sand required | 20 kg |
| Filtration Type | Sand |
| Suitable for Pool Volume | 19 m³ |
