Why is the weight reading unstable on my Steinberg Systems Scales?
If the weight reading on your Steinberg Systems Scales is unstable, it could be due to over voltage, moisture, insufficient voltage, prolonged battery use after the warning alarm, or high humidity. Try charging the battery for at least 10 hours. If that doesn't work, clean the Mother PCB to ensure it is dry.
How to fix AC lamp not glowing on Steinberg Systems Scales?
If the AC lamp on your Steinberg Systems Scales isn't glowing, the mains plug might be disconnected. Ensure the power plug is properly inserted. If it is, the power cable may be damaged and needs to be replaced.
What to do if Over voltage LED glows, alarms and automatically turn off on Steinberg Systems Scales?
If the Over voltage LED glows, alarms sound, and your Steinberg Systems Scales automatically turn off, it may be because the battery has been in use for too long. Try charging the battery. If the issue persists, the battery might be damaged and should be replaced.
Why is my Steinberg Systems Scales not turning on with battery?
If your Steinberg Systems Scales are not turning on with the battery, the storage battery may be damaged and needs replacing with a similar model. Also, check the battery connections to ensure they are in good condition.
Outlines the fundamental steps for using the scale: zeroing, weighing items, and applying tare.
Guidelines for proper battery charging and handling to prevent damage.
Precautions regarding exposure to water, rain, sunlight, and high temperatures.
Warning against installing the scale near humidifiers or in constant humidity.
General| Brand | Steinberg Systems |
|---|---|
| Model | SBS-PW-402 |
| Category | Scales |
| Language | English |
To Next Page