Why is the weight reading unstable on my Steinberg Systems SBS-PW-402C Scales?
If the weight reading on your Steinberg Systems Scales is unstable, it could be due to over voltage, moisture, insufficient voltage, prolonged battery use after the warning alarm, or too much humidity. Try charging the battery for at least 10 hours. Additionally, clean the Mother PCB to ensure it is dry.
What to do if the over voltage LED glows, alarms and the Steinberg Systems Scales automatically turn off?
If the over voltage LED glows, and your Steinberg Systems Scales alarms and automatically turns off, it could be due to the battery being in use for too long. Try charging the battery. If the issue persists, the battery may be damaged and should be replaced.
What to do if Steinberg Systems SBS-PW-402C Scales are not turning on with battery?
If your Steinberg Systems Scales are not turning on with the battery, it could be due to a damaged storage battery. Replace the battery with a similar model. Alternatively, the battery connections may not be proper; ensure that the connections are in good condition.
How to fix an AC lamp that is not glowing on Steinberg Systems SBS-PW-402C?
If the AC lamp on your Steinberg Systems Scales is not glowing, the mains plug may be disconnected. Insert the power plug or replace it if damaged. Another possibility is that the power cable is damaged, in which case you should change the power cable.
How to fix AC lamp not glowing on Steinberg Systems Scales?
If the AC lamp on your Steinberg Systems Scales isn't glowing, the mains plug might be disconnected. Ensure the power plug is properly inserted. If it is, the power cable may be damaged and needs to be replaced.
What to do if Over voltage LED glows, alarms and automatically turn off on Steinberg Systems Scales?
If the Over voltage LED glows, alarms sound, and your Steinberg Systems Scales automatically turn off, it may be because the battery has been in use for too long. Try charging the battery. If the issue persists, the battery might be damaged and should be replaced.
Why is my Steinberg Systems Scales not turning on with battery?
If your Steinberg Systems Scales are not turning on with the battery, the storage battery may be damaged and needs replacing with a similar model. Also, check the battery connections to ensure they are in good condition.
General| Material weighing platform | stainless steel |
|---|---|
| Calibration | external |
| Display | LCD |
| Interface | RS232 |
| Units | kg, lb |
| Functions | Tare, Hold, Zero |
| Power supply | AC adapter |
| Tare range | full capacity |
Details the function and location of the Tare, Zero, Low Battery, and AC power indicators.
Provides general guidance for using the scale, including battery status and warm-up time.
Covers essential functions like zeroing the scale, weighing items, and using the tare function.
Explains the overload warning and the need to remove items to prevent damage.
Guides users on how to input unit prices for calculating total item value.
Details the necessary steps before starting accumulation operations.
Explains how to add items to the accumulator and store price values.
Describes how to reset accumulated values using the C (Clear) key.
Instructions on how to save up to 7 different unit prices.
Guide to recalling and using saved unit prices during weighing.
Provides essential guidance on battery charging, maintenance, and polarity.
Advises on protecting the scale from water, humidity, and extreme temperatures.
Warns against strong magnetic fields and unauthorized repairs.
Lists common issues like AC lamp not glowing or scale not turning on, with solutions.
To Next Page