EasyManua.ls Logo

STEINEL L 830 SC - Troubleshooting Guide

STEINEL L 830 SC
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
– 45 –
12. Troubleshooting
Malfunction Cause Remedy
Light without power ■ Fuse has tripped,
not switched ON,
break in wiring
■ Short circuit
■ Activate, change fuse,
turn ON mains switch,
check wiring with
voltage tester
■ Check connections
Sensor-switched light will
not switch ON (SC only)
■ Twilight setting in
night-time mode
during daytime
operation
■ Mains switch OFF
■ Fuse has tripped
■ Detection zone not
correctly adjusted
■ Set twilight via app
■ Switch ON
■ Activate, change fuse,
check connection if
necessary
■ Set reach via app
Sensor-switched light will
not switch OFF (SC only)
■ Continued movement
within the detection
zone
■ Check detection
zone and readjust if
necessary
Sensor-switched light
will not switch OFF
completely (SC only)
■ Night light selected ■ Set night light to
“0min”
Sensor-switched light
switching ON when it
shouldnot (SC only)
■ Wind is moving trees
and bushes in the
detection zone
■ Cars in the street are
detected
■ Change detection
zone
■ Change detection
zone
Sensor-switched light
switches ON and OFF in
an uncontrolled manner
(SC only)
■ Large metal objects,
such as cars or metal
walls, in the detection
zone
■ Change detection
zone
■ E.g.park car
somewhere else

Table of Contents