Need help?Do you have a question about the STEINEL L 910 S and is the answer not in the manual?
General| Power Source | Mains-powered |
|---|---|
| Material | Aluminium |
| Color | Anthracite |
| Light Source | LED |
| Wattage | 12.5 W |
| IP Rating | IP44 |
| Mounting height max. | 2.5 m |
| Sensor Technology | Passive infrared |
| Colour temperature | 3000 K |
| LED cooling system | Passive Thermo Control |
| Detection angle | 180° |
| Sneak-by guard | Yes |
| Reach, max. | 12 m |
| Basic light level function | Yes |
| Main light adjustable | Yes |
| Protection class | I |
| Operating Temperature | -20 to +40 °C |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Type | Outdoor Light |
| Mains power supply | 220 – 240 V / 50 – 60 Hz |
| Colour Rendering Index | Ra ≥ 80 |
| LED life expectancy | 50000 hours |
| Response threshold twilight | 2 - 2000 lx |
| Time setting | 5 s - 15 min |
| Temperature | -20°C to +40°C |
Configures effect lighting mode, main light, or soft start.
Sets effect lighting for the entire night or half the night.
Sets the lux level for twilight activation (20 lux or 2 lux).
Addresses issues where the light is not powered, checking fuses and wiring.
Troubleshooting steps for the light failing to turn on.
Guidance for when the light fails to turn off.
Resolves issues of the light activating without detected movement.
To Next Page
