STEINEL MobileGlue 1007 User Manual

- 11 -
Operation / glueing
Button LED red LED green
ON Switch ON. Press button for approx. 2 sec.
Green LED flashes for 15 sec.
Applicator ready for use
Applicator starts for a further 5 min. each time you
press the trigger
No glueing for 5 min.
Applicator switches OFF
Switch applicator back ON at button
Red and green LED flashes alternately after
applicator has been in use for approx. 20 min.
The applicator can now only be used for approx.
another 10 min.
Red LED flashes 1×
Battery flat, start charging using USB charger
Dimensions (H × B × T): MobileGlue 1007 MobileGlue 1007-S
157×47×158 mm 179×40x65 mm
Battery: lithium-ion
Battery voltage, capacity: 3.6V, 1.5Ah
Rechargeable-battery run time: approx. 30 minutes (continuous operation)
Battery charging time: 90% in 3 hours
Warm-up time: less than 15 seconds
Melt temperature: approx. 170°C
Recommended glue sticks: Ø 7 mm genuine STEINEL /
Cristal sticks, Prod. No. 006594, 006624 /
Ultrapower sticks, Prod. No. 006730, 006747 /
Color sticks, Prod. No. 006969 /
Glitter sticks, Prod. No. 065539
Technical Specifications
Disposal
Electrical and electronic equipment,
accessories and packaging must be re-
cycled in an environmentally compatible
manner.
Do not dispose of electrical and
electronic equipment as domes-
tic waste.
EU countries only:
Under the current European Directive on
Waste Electrical and Electronic Equip-
ment and its implementation in national
law, electrical and electronic equipment
no longer suitable for use must be col-
lected separately and recycled in an envi-
ronmentally compatible manner.
GB

STEINEL MobileGlue 1007 Specifications

General

Brand	STEINEL
Model	MobileGlue 1007
Category	Glue Gun
Language	English