Need help?Do you have a question about the STEINEL RS PRO Series and is the answer not in the manual?
General| Brand | STEINEL |
|---|---|
| Model | RS PRO Series |
| Category | Accessories |
| Language | English |
Polar diagrams illustrating the detection patterns for the RS Pro 500 sensor and slave units.
Polar diagrams illustrating the detection patterns for the RS Pro 1000/2000 sensor and slave units.
Detailed step-by-step instructions for installing the RS Pro 500 Sensor and Slave models.
Detailed step-by-step instructions for installing the RS Pro 1000/2000 Sensor and Slave models.
Guidance and information for installing the STEINEL SensorLight.
Illustrates various application scenarios for RS PRO system lamps.
Lists and identifies key components of the RS PRO system.
Explains how the active motion detector and HF-sensor function.
Illustrates detection areas for ceiling installations.
Illustrates detection areas for wall installations.
Essential safety precautions before installation and maintenance.
Guidance on wiring, connecting power, and mounting the device.
Guidance on connecting additional loads to the SensorLight.
Detailed technical data for RS PRO 500, 1000, and 2000 models.
Explanation of sensor functions, twilight, time, and reach settings.
Adjusting the light level at which the sensor activates.
Configuring the duration the light remains on after detection.
Temporary mode for easier adjustment and testing.
Adjusting the detection range of the motion sensor.
Advice on seasoning new fluorescent tubes for optimal performance.
Instructions for activating manual control of the light.
To Next Page
