69
Table 5-1 Unit Troubleshooting
Malfunction Test / Inspection Corrective Action Ref. Para.
3. Beams do not a. Verify adjuster function. -Clean as required. 5.2.a
move. -Return for repair. 5.6.a
4. Remote Cable a. Inspect Remote Cable Port -Clean remote cable port 5.2.f
Switch inoperable, for dirt or debris.
but the Integrated b. Inspect remote cable plug -Replace remote cable 5.2.g
Momentary for damaged contacts. assembly.
Activation Switch c. Possible remote cable failure. -Replace remote cable. 5.2.g
functions . -Return for repair. 5.6.a
5. Laser cannot be a. Inspect weapon system rail. -Refer to appropriate
aligned, moves on weapons TM.
rail, or when reset
to factory neutral
fails to project the
IR POINT on the
same side of the
target as the
laser is mounted.
To Next Page
Loading...