Stel THOR 103 - 7.0 Maintenance; 7.1 Routine Maintenance; 7.2 Cleaning the Inside of the Machine; 7.3 Preventive Maintenance of the Generator


THOR 103

STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail: stel @ stelgroup.it
http: www.stelgroup.it
7.0– MAINTENANCE
7.1– ROUTINE MAINTENANCE




7.2- CLEANING THE INSIDE OF THE MACHINE


-
-



-
 
-

-
7.3- PREVENTIVE MAINTENANCE OF THE
IT IS OBLIGATORY TO REMOVE THE PLUG FROM THE POWER SOCKET
BEFORE CARRYING OUT ANY MAINTENANCE WORK ON THE MACHINE.
THE ELECTROLYTIC CONDENSERS INSTALLED INSIDE THE MACHINE
REMAIN LIVE EVEN AFTER THE PLUG HAS BEEN REMOVED FROM THE
POWER SOCKET. IT IS OBLIGATORY TO WAIT AT LEAST 5 MINUTES
BEFORE REMOVING THE CASING AND GAINING ACCESS TO THE
INSIDE.
BEFORE INSPECTING OR CHANGING PARTS OF THE TORCH, SWITCH
OFF THE POWER SUPPLY TO THE THOR.
IN NO CASE MUST MAINTENANCE WORK BE DONE WITHOUT HAVING
FIRST DISCONNECTED THE POWER SOURCE.
THE GREATEST CARE MUST BE TAKEN WHEN CHECKING THE INSIDE OF
THE MACHINE, DUE TO THE PRESENCE OF DANGEROUS VOLTAGE.
ENGLISH
TECHNICAL
DESCRIPTION

THOR 103

STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail: stel @ stelgroup.it
http: www.stelgroup.it
7.0– MAINTENANCE
7.1– ROUTINE MAINTENANCE




7.2- CLEANING THE INSIDE OF THE MACHINE


-
-



-
 
-

-
7.3- PREVENTIVE MAINTENANCE OF THE
IT IS OBLIGATORY TO REMOVE THE PLUG FROM THE POWER SOCKET
BEFORE CARRYING OUT ANY MAINTENANCE WORK ON THE MACHINE.
THE ELECTROLYTIC CONDENSERS INSTALLED INSIDE THE MACHINE
REMAIN LIVE EVEN AFTER THE PLUG HAS BEEN REMOVED FROM THE
POWER SOCKET. IT IS OBLIGATORY TO WAIT AT LEAST 5 MINUTES
BEFORE REMOVING THE CASING AND GAINING ACCESS TO THE
INSIDE.
BEFORE INSPECTING OR CHANGING PARTS OF THE TORCH, SWITCH
OFF THE POWER SUPPLY TO THE THOR.
IN NO CASE MUST MAINTENANCE WORK BE DONE WITHOUT HAVING
FIRST DISCONNECTED THE POWER SOURCE.
THE GREATEST CARE MUST BE TAKEN WHEN CHECKING THE INSIDE OF
THE MACHINE, DUE TO THE PRESENCE OF DANGEROUS VOLTAGE.
ENGLISH
TECHNICAL
DESCRIPTION