Stel THOR 103 - User Manual


THOR 103

STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail: stel @ stelgroup.it
http: www.stelgroup.it
PRESENTAZIONE
ITALIANO
Gentile Cliente,
grazie per la fiducia accordataci.
  THOR 103      STEL







THOR 103

STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail: stel @ stelgroup.it
http: www.stelgroup.it
PRESENTAZIONE
ITALIANO
Gentile Cliente,
grazie per la fiducia accordataci.
  THOR 103      STEL







Summary

1.0 Safety

1.1 Warnings

General safety warnings, electric shock, pressure, radiation, noise, heat.

1.2 Safety Instructions

Instructions for burns, fire, and electric shocks.

2.0 Specifications

4.0 Connection

5.0 Setting Up

5.1 Controls on the Front Panel

Explanation of front panel controls and indicators.

6.0 Installation and Operation

6.1 Correct Cutting Position

Operator positioning for fume extraction.

6.2 Starting Up

6.3 Instructions for Use

Step-by-step guide for basic operation.

6.4 Cutting in Automatic Mode

6.5 Cutting in Manual Mode

6.6 Contact Cutting

6.7 Switching Off

7.0 Maintenance

7.1 Routine Maintenance

General maintenance tasks and precautions.

7.2 Cleaning the Inside of the Machine

7.3 Preventive Maintenance of the Generator

Proactive steps to maintain the generator.

7.4 Changing Worn Parts

9.0 Troubleshooting

9.1 Most Common Problems During Cutting

Identifies common cutting issues and their causes.

9.2 Fault - Cause - Remedy

Detailed fault finding and resolution guide.

11.0 Wiring Diagram

12.0 Service and Maintenance

12.1 Introduction

12.2 General Torch Maintenance

Procedures for cleaning and maintaining the torch.

12.3 Common Operating Faults

Lists common problems and their potential causes.

12.4 Inspection and Replacement of Consumable Torch Parts

Guide to checking and replacing torch consumables.

Stel THOR 103 Specifications

General

Brand	Stel
Model	THOR 103
Category	Welding System
Language	English