Why is my Stellar Hearth LG-INS Indoor Fireplace remote not working?
If the remote for your Stellar Hearth Indoor Fireplace isn't working, here are a few things to check: * Make sure you've installed new batteries correctly in the remote. * Ensure the fireplace insert is plugged in and has power. * Try relearning the transmitter to the remote. * Check if the transmitter is locked (look for a lock icon).
What to do if the pilot will not light on my Stellar Hearth LG-INS?
If the pilot light on your Stellar Hearth Indoor Fireplace won't light or stay lit, try the following: * Confirm that the gas supply is turned on. * Check if the main control module is receiving a signal from the remote by listening for a beep from the receiver when you press the ON button. * Ensure the ground is securely connected to the tab on the valve. * Verify the pilot flame is in contact with the rectification sensor or the pilot assembly. * If the flame is too small, check the gas pressure on the supply line.
Why does the ignitor continue to spark on my Stellar Hearth LG-INS when the pilot is burning?
If the ignitor continues to spark on your Stellar Hearth Indoor Fireplace even when the pilot is burning, consider these solutions: * Ensure the ground is securely connected to the tab on the valve. * Make sure the pilot flame is in contact with the rectification sensor or the pilot assembly. * If the flame is too small, check the gas pressure on the supply line. * Clean the flame sensor with a piece of emery cloth.
How to fix a Stellar Hearth Indoor Fireplace when the main flame will not light?
If the main flame on your Stellar Hearth Indoor Fireplace won't light, you should: * Check if the module is in Warm Up Mode due to pilot flame signal loss. * Verify the valve is hooked up properly.
How to fix remote not working for Stellar Hearth LG-INS Indoor Fireplace?
If the remote for your Stellar Hearth Indoor Fireplace isn't working, first ensure that new batteries are correctly installed in the transmitter. Then, check that the insert is plugged in and has power. You might also need to learn the transmitter to the remote. Finally, check if the transmitter is locked (indicated by a lock icon).
Why won't the pilot light stay lit on my Stellar Hearth LG-INS?
If the pilot light on your Stellar Hearth Indoor Fireplace won't light or stay lit, first check that the gas supply is turned on. Next, verify the main control module is receiving a signal from the remote by listening for a beep when you press the ON button. If you don't hear a beep, make sure the main control module has learned the remote. Also, ensure the ground is securely connected to the tab on the valve, as a proper ground is essential. Finally, make sure the pilot flame is in contact with the rectification sensor or the pilot assembly; if the flame is too small, check the gas pressure on the supply line.
What to do if pilot light is burning but ignitor continues to spark on Stellar Hearth Indoor Fireplace?
If the pilot light is burning but the ignitor continues to spark on your Stellar Hearth Indoor Fireplace, ensure that the ground is securely connected to the tab on the valve, as a proper ground is essential. Also, make sure the pilot flame is in contact with the rectification sensor or the pilot assembly; if the flame is too small, check the gas pressure on the supply line. You can also try cleaning the flame sensor with a piece of emery cloth.
Why main flame will not light on Stellar Hearth LG-INS?
If the main flame on your Stellar Hearth Indoor Fireplace won't light, first verify that the module is not in Warm Up Mode due to pilot flame signal loss. In this mode, the pilot will run for up to one minute to warm the firebox before the main burner flame lights. Also, verify that the valve is hooked up properly.
General| Brand | Stellar Hearth |
|---|---|
| Model | LG-INS |
| Category | Indoor Fireplace |
| Language | English |
To Next Page
