4
INSSFEU0914
CONTINUOUS VENTILATION
panel picture).
CONTINUOUS HEATING
The continuous heating option allows one or two heating elements to operate continuously. The user can select the minimum (one element) or
mode is useful from the beginning to the end of the heating season since it reduces temperature variations into the house. If the minimum or
maximum continuous heating option is activated by the user, the furnace will deactivate it when the heating season ends (more than two hours
without any heating demand). Moreover, it will reactivate it when a new heating season begins. Note that the pilot light indicating the heating
option will blink if the furnace deactivates this option because the heating season is over. This indicates that the continuous heating will be
activated again at the start of the next heating season.
AIR CONDITIONING
HEAT PUMP
After the furnace (air supply), and installation ”B” must be selected when
the heat pump is installed B
blower starts-up at high speed.
HEAT PUMP
AIR RETURN
AIR SUPPLY
MIN. 12"
AIR RETURN
AIR SUPPLY
HEAT PUMP
HEAT PUMP
AIR RETURN
TYPE "B"
AIR SUPPLY
To Next Page
Loading...
