Step2 Big Builders Pro Workshop 4891

OBSERVE ALL STATEMENTS AND WARNINGS TO REDUCE
THE LIKELIHOOD OF SERIOUS OR FATAL INJURY.
SAVE THIS SHEET FOR FUTURE REFERENCE.
SAFETY INFORMATION:
• Provide continuous adult supervision at all times.
• Instruct children not to use product until properly assembled.
• Use caution not to over-tighten screws or they will not hold parts
together appropriately.
WARNING:
CHOKING HAZARD
Small parts. Sharp points. Adult assembly required.
INTENDED FOR USE BY CHILDREN FROM AGES 3 YEARS AND UP.
The Step2 Company, LLC.
10010 Aurora-Hudson Rd.
Streetsboro, OH 44241 USA
1-800-347-8372 USA & Canada Only
(330)656-0440
www.step2.com
For assistance or replacement parts please contact:
Big Builders Pro
Workshop
™
4891 / 4949
IMPORTANT:
• Do not mix old and new batteries.
• Do not mix dierent types of batteries.
• Insert batteries with correct polarity.
• Remove exhausted batteries from the toy.
• Follow battery manufacturer’s warnings and recommendations.
CLEANING INSTRUCTIONS
Electronic Components:
• Do not submerge in water or spray liquid directly on unit.
• Use mild detergent solution.
• Wipe with damp cloth.
General Cleaning:
• Use mild soapy water.
• Parents should thoroughly wash accessories before use.
DECAL APPLICATION:
Clean and dry area thoroughly. Center decal in area. Apply pressure
from center to outer edge.
DISPOSAL INSTRUCTIONS:
Please recycle when possible. Disposal must be in compliance with
government regulations.
INSPECT THIS PRODUCT BEFORE EACH USE. TIGHTLY
SECURE CONNECTIONS AND REPLACE DAMAGED OR
WORN COMPONENTS. CONTACT THE STEP2 COMPANY
FOR REPLACEMENT PARTS.
194243B01B10/02/2018 1

Step2 Big Builders Pro Workshop 4891 Specifications

General

Brand	Step2
Model	Big Builders Pro Workshop 4891
Category	Toy
Language	English

Summary

Safety Warnings and Information

Choking Hazard Warning

Contains small parts and sharp points. Adult assembly required. Reduce risk of serious or fatal injury.

General Safety Precautions

Provide continuous adult supervision. Instruct children not to use product until properly assembled.

Product Usage and Care Instructions

Battery Handling and Cleaning

Follow battery guidelines. Clean electronic components and general parts with mild solutions.

Decal Application and Disposal

Apply decals correctly. Dispose of product responsibly through recycling.

Pre-Use Inspection and Maintenance

Inspect product before each use, tighten connections, replace worn parts.

Parts Identification

Component List

Lists all necessary parts with corresponding labels for assembly.

Battery Requirements

Specifies the types and quantities of batteries required for the light and drill.

Assembly Steps Overview

Decal Application

Instructions for applying decals (A1, A2) to the main unit.

Battery Compartment Installation

Steps for inserting the correct battery type into the compartment.

Assembly Steps - Continued

Component Assembly

Detailed steps for assembling various parts using screws.

Repeating Steps

Instructions to repeat specific assembly actions on the other side.

Functional Assembly

ForwardReverse Switch

Instructions for installing batteries and operating the forward/reverse switch.

Safety Notes for Small Parts

Warning that foam pieces are not suitable for children under 3 years.

Final Assembly and Decal Placement

Decal Application Guide

Visual guide for placing various decals on the assembled workshop.

Product Identification

Labels for different parts of the workshop (B1, C1, J1, etc.).

Multi-Language Safety and Instructions

Safety Warnings (French, Spanish, Italian, Dutch, Portuguese)

General warnings including choking hazards, adult supervision, and material safety.

Cleaning and Disposal (French, Spanish, Italian, Dutch, Portuguese)

Instructions for cleaning electronic parts, general cleaning, and product disposal.

Comprehensive Usage Guidelines

Cleaning, Disposal, and Battery Safety (Multiple Languages)

Covers cleaning electronic parts, general cleaning, disposal, and battery handling in various languages.

Pre-Use Inspection and Part Replacement (Multiple Languages)

Emphasizes inspecting the product, tightening connections, and contacting for replacement parts.