EasyManua.ls Logo

STEPCRAFT 420 - Maintenance; Safety; Maintenance Works

STEPCRAFT 420
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
7 TRANSPORTATION / STORAGE
7.1 TRANSPORTATION
NOTICE: Please observe that the machine is very heavy and bulky when transporting it.
If necessary transport the machine with the help of a second person.
Please only use suitable transportation vehicles and carriers for transportation.
WARNING: Never lift heavy loads above people!
7.2 PACKAGING
When you do not want to reuse the packaging material of the machine and of its components please separate it
according to the disposal conditions on site and take it to a collection center for recycling or dispose of it.
7.3 STORAGE
If the machine or its components is not used for a longer time please note the following for the storage:
- Store the machine and the components only in closed rooms
- Protect it against humidity, wetness, cold, heat and direct sun radiation
- Store it dust-free, cover it, if required
- The storage place must not be subject to vibrations
8 MAINTENANCE
8.1 SAFETY
WARNING: Before performing maintenance works on the machine switch it off and secure it against
unintended restarting by disconnecting the mains switch of the controller!
WARNING: Before you use a system-guided tool with its own mains plug disconnect it also!
NOTICE: All maintenance works must only be performed by a technically experienced person.
WARNING: In case of improper handling of the machine there is a high risk of injury!
8.2 MAINTENANCE WORKS
NOTICE: Always thoroughly handle your STEPCRAFT in order to enjoy working with it for a long time. Regular
maintenance crucially influences the service life of your machine.
Therefore please perform the following maintenance:

Table of Contents

Other manuals for STEPCRAFT 420

Related product manuals