Stephill SSD6000 - Control Panel Identification; Dual Voltage - Standard

SSD6000-SSD6000S-SE6000D4
6
Fig.2 below shows a typical example of a standard dual voltage control panel.
Fig.2
1
Hours Run Meter
7
Serial Data Plate
2
230V RCD
8
Main 20A MCB
3
115V Socket Outlets (Yellow)
9
Earth Stud - M8
4
AC Voltage Selector Switch
10
230V Socket Outlets (Blue)
5
Socket Outlet Reset Button(s)
11*
Warning & Shutdown Lamps
6
Key Switch & DC Reset Button
Fig.3
Control Panel Identification
Dual Voltage - Standard
Item No.
Description
Description
Item No.
* The Warning & Shutdown Lamps description can be
found in Operating Instructions . These are LED
lamps.
Fig.3 shows the previous version of the Warning & Shutdown lamps. These operate
exactly the same as the current versions shown in Fig.2 & Fig.4 but are not LED.
IMPORTANT: It is highly recommended to periodically check and test the 12V bulbs in
the lamp holders as shown in Fig.3. A faulty bulb can inhibit basic fault finding.
8
4
5
3
9
10
7
1
11*
6
2