1111
3.5 Statistics
The statistics table shows data packets transmitted and received during this session. You
can click the “Reset” button to clear these values and restore the account.
3.6 WiFi security settings
Note: You can use WPS only if the router also has the WPS feature.
A: By NIP
Select the “Protection WiFi settings” tab in the adaptor utility.
To choose the WPS NIP select “Input NIP from AP” box, provide WPS NIP and click “Input
pin confi guration”. This PIN is usually printed on a label on the router. If it is not on the router
or has been changed, it is possible you may need to access the router interface.
If you prefer, you can choose to use the NIP that offers this wireless adapter, click input pin
confi guration (PIN Input Confi g) and insert the PIN in the router interface.
B: By button
Press and hold the WPS button on the back of the router until the LED blinks (or as marked
on the manufacturer’s manual).
Press the WPS button on your wireless network adapter and hold for 3-5 seconds.
A secure connection is established automatically.
It can also be used in reverse order - press and hold the WPS button on the adapter briefl y,
then press and hold the WPS button on the router.
If there is more than one access point when using the method button, it can be session
confl ict. Please use the PIN method or wait to press the button again.
To Next Page
Loading...
