Do you have a question about the Sterilight Silver S8Q-PA and is the answer not in the manual?
Warns about UV light causing burns to eyes and skin.
Covers grounding, mounting, sterilization, GFCI, indoor use, cold water line, and pre-filters.
Step-by-step guide for replacing and cleaning the UV lamp.
Procedures for removing, cleaning, and reassembling the quartz sleeve.
Lists symptoms like pressure drop, high bacteria, leaks, and their causes/solutions.
| Model | S8Q-PA |
|---|---|
| Category | Laboratory Equipment |
| Flow Rate @ 30mJ/cm2 | 8 GPM |
| Flow Rate | 8 GPM |
| Warranty | 1 year |
| Type | UV Disinfection System |
| Application | Water sterilization |
| Max UV Output | 30 mJ/cm² |
| Inlet/Outlet Port Size | 1" NPT |
| Voltage | 120V/60Hz |
| Maximum Operating Pressure | 125 PSI |
| Maximum Ambient Water Temperature | 104°F |
Loading...