To Next PageTo Next Page
Need help?Do you have a question about the Sterilight Silver SQ-PA and is the answer not in the manual?
General| Brand | Sterilight |
|---|---|
| Model | Silver SQ-PA |
| Category | Laboratory Equipment |
| Language | English |
Basic safety precautions, including handling damaged equipment and post-installation checks.
Rules for operation, cord handling, intended use, and storage conditions.
Guidance on using extension cords and observing system notices.
Warning about the dangers of direct UV light exposure to eyes and skin.
Lists ideal levels for iron, hardness, turbidity, and UV transmittance.
Advises on pre-treatment for water issues and testing.
Specifies grounded receptacle and GFCI circuit connections.
Discusses vertical/horizontal mounting and ballast positioning.
Covers system sterilization, GFCI connection, and installation location.
Shows system layout and guides on choosing a suitable mounting location.
Details mounting, flow restrictor installation, and controller grounding.
Covers plumbing connections, leak checks, and initial power-up.
Instructions for flushing the reactor and a note on warm water.
Step-by-step guide for chemically disinfecting the system and plumbing.
Addresses potential issues with hot water tanks fed by raw water.
Key points for safe and effective system operation.
Procedure for replacing and cleaning the UV lamp, including precautions.
Detailed steps for removing, cleaning, and reinstalling the quartz sleeve.
Instructions for handling, cleaning, and reassembling the UV sensor.
Explains the display of remaining lamp life and countdown.
How to temporarily silence the alarm and reset the timer.
How to view the total running time of the controller.
Describes the system's response to lamp or ballast failure.
Explains the UV sensor's role and the intensity percentage display.
Details the conditions and readings for low UV intensity.
Lists potential issues leading to low UV intensity.
Explains the solenoid valve's function during low UV intensity.
Indicates lamp life expired, requiring replacement or reset.
Signifies lamp/ballast failure or power issues.
Explains readings indicating potential water quality issues.
Indicates a low UV alarm, possibly deferred.
Graphical data for UV dose requirements at different flow rates.
Details flow rates and physical dimensions for basic models.
Lists voltage, power consumption, operating pressure, and temperature.
Covers features like visual power-on, lamp replacement reminder, and lamp type.
Details flow rates and physical dimensions for Plus models.
Lists voltage, power, and advanced features like UV monitor and solenoid output.
Outlines warranty periods for hardware, lamps, and chambers.
Specifies water quality and usage terms for warranty validity.
