To Next PageTo Next Page
Need help?Do you have a question about the Sterling Power Products Pro Charge Ultra and is the answer not in the manual?
General| Brand | Sterling Power Products |
|---|---|
| Model | Pro Charge Ultra |
| Category | Battery Charger |
| Language | English |
Details the IP67 waterproofing for electronics and IP55 rating for the fan.
Describes optional temperature sensing and trip features for battery monitoring.
Instructions on how to safely remove the unit's lid and associated warnings.
Explains the module's role in managing multiple battery chemistries and its benefits.
Outlines essential requirements for the main battery charger to work with the module.
Guides on selecting an installation location and reiterates lid removal procedure.
Details positive/negative cable sizing and fuse selection for safe operation.
Instructions on configuring the main charger to the lowest battery voltage setting.
Step-by-step guide for selecting the correct battery chemistry using the rotary switch.
Provides recommended settings for various battery types like Gel, AGM, and LiFePO4.
Explains error codes (EOx) indicated by the red LED and their meanings.
Details warning conditions indicated by the yellow LED, such as low voltage or high temperature.
Describes how to manually trip the unit using the remote control for isolation.
Outlines the sequence of LEDs and fan operation during unit startup and self-testing.
Explains the 5-stage charging cycle and how it's displayed on the unit's LEDs.
A table detailing charge, conditioning, and float voltages for various battery chemistries.
Explains the functions of the left and right buttons for voltage and temperature display.
Guides on accessing the setup menu, scrolling through parameters, and adjusting settings.
Details various settable parameters like battery profile type, voltage cut-off, and LED behavior.
Illustrates a basic installation of the unit with a single output charger.
Explains how to connect the temperature sensor for charging curve adjustment and trip functions.
Describes the optional blue temperature trip feature for daisy-chaining multiple batteries.
Details how to use the remote voltage sensor to compensate for voltage drop in long cables.
Explains the use of the ignition out port (Position 15) for integrating with other Sterling products.
Shows how to flexibly use multiple units with a single output charger.
Illustrates incorrect methods of connecting the product to avoid damage.
Demonstrates the proper way to connect the product to a single output charger.
Outlines the terms, conditions, and coverage of the 2-year limited factory warranty.
Provides instructions on how to make a warranty claim and contact Sterling Power.
