How to fix 'RF module software version too low' on stertil ST 1065-FWF Lifting columns?
If the RF module software version is too low on your stertil Lifting columns because another RF module is installed, fit an RF module with the right software.
What to do if stertil Lifting columns have low battery and no movements possible?
If your stertil Lifting columns have low battery and no more movements are possible after more than 15 movements on a single battery charge, set the system to charging. Note that if this happens during lifting, the motor continues to run.
What to do if stertil Lifting columns have very low battery and no movements possible?
If your stertil Lifting columns have very low battery and no more movements are possible after more than 15 raise actions on a single battery charge, set the system to charging.
How to troubleshoot 'no communication with RF module' on stertil Lifting columns?
If there is no communication with the RF module in your stertil Lifting columns because of loose wiring or a defective RF module, check the wiring or replace the RF module.
How to fix 'column software version too low' on stertil ST 1065-FWF Lifting columns?
If the column software version is too low on your stertil Lifting columns because another PCB is installed, fit a PCB with the right software.
What to do if the motor relay is active on stertil ST 1065-FWF?
If the motor relay is active on your stertil Lifting columns because the motor relay may have stuck, replace the motor relay.
What causes no communication with a slave column on stertil Lifting columns?
If there is no communication with a slave column in your stertil Lifting columns because the distance between the columns is too great or the time interval between messages is too great, reboot the system. If the fault occurs again, contact technical services.
What to do if stertil Lifting columns show 'motor controller error'?
If your stertil Lifting columns show a motor controller error because there is a fault in the motor controller, reset the fault by pressing the [SELECT] and [UNLOCK] buttons for 2 seconds. If the fault occurs again, please consult the service department.
What to do if stertil ST 1065-FWF show 'ID-key conflict'?
If there is an ID-key conflict with your stertil Lifting columns because the ID-key has a code that is not allowed, use a different ID-key.
Why are my stertil ST 1065-FWF 'waiting for communication'?
If your stertil Lifting columns are 'waiting for communication' due to wireless reception problems, wait for return of reception (max. 45 sec).
Main title of the manual identifying the product.
Explains manual purpose, conventions, and manufacturer details.
Details regarding product warranty and legal responsibility.
Emphasizes safety precautions and outlines potential hazards.
Provides general safety rules, warnings, and requirements for personnel.
Details lift safety mechanisms and procedures for energy isolation.
Covers disposal, REACH, and recommended operator training levels.
Provides detailed technical data and model identification for the lifts.
Explains the hydraulic lifting mechanism and the synchronized electronic control system.
Lists and describes major parts like columns, control boxes, and forks.
Step-by-step guide for installing and preparing the lift columns.
Explains lift operation modes and critical safety guidelines for hoisting.
Details wireless linking of columns and control box functions for starting.
Instructions for raising, lowering, emergency unblocking, and safety locks.
Guidelines for outdoor operation and adjusting lift forks for different wheel sizes.
Describes available accessories like wheel adapters and traverse beams.
Defines maintenance goals, daily checks, and monthly/annual service schedules.
Details lubrication and specific tasks for regular preventive maintenance.
Covers hydraulic oil, emergency shutdown, and safety locking feature checks.
Information on battery capacity checks and the function of maintenance switches.
Lists and explains various configurable settings for lift operation and features.
Outlines safety rules, knowledge needed, and procedures for corrective maintenance.
Provides guidance for diagnosing and resolving errors, faults, and warnings.
Introduces the overview of main assemblies and their parts.
Detailed part lists and diagrams for various components like guide blocks and columns.
Lists parts for hydraulic units, cylinders, and control boxes.
Includes electrical and hydraulic diagrams, plus dimensional drawings.
A template for recording inspection results and mechanic's initials.
General| Brand | stertil |
|---|---|
| Model | ST 1065-FWF |
| Category | Lifting columns |
| Language | English |
To Next Page
