STERWINS 1300 JET AUTO 5I-3 - 4.1 UNBOXING; 4.2 INSTALLATION

202
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
4.1 UNBOXING
1. ON/OFF switch
2. Connector caps
3. Discharge connector (output)
4. Drainage plug
5. Suction connector (input)
6. Pressure control
7. Outlet
8. Inlet
9. Adaptor
10. filling plug
•Do not use any sharp tool (cutter, knife...) when unboxing, you
may damage the product.
•Do not use the power cord to lift, carry or transport the
machine.
•Do not scrape the power cord across sharp edges and ensure
that it does not get pressed.
4.2 INSTALLATION
Tightly screw the pump illustration
2.2
Attach the pump to a flat level surface with suitable screws and silent block if necessary.
DANGER! Risk of injury due to electric shock.
Warning! Do not plug in before installation is fully completed !
6
9
8
7
10
5
4
1
3
2
X3