2. SAFETY INSTRUCTIONS
etc., to ensure operator’s safety.
• WARNING: For safety reasons, high pressure hoses, valves and couplings
must be used with unit. The new hose-sets supplied with the appliance are
to be used. Old hose-sets should not be reused.
• WARNING: In the event of contact with or spillage of detergents, ush
with water. If liquid contacts eyes, additionally seek medical help.
• WARNING: In the event of an equipment breakdown (such as nozzle or
component failure),have you high pressure washer serviced by a qualied
repair person using only identical replacement parts.
• Vehicle tyres/tyre valves are susceptible to damage from the high-
pressure jet and may burst .The rst indication for this is a discolouration of
the tyre. Damaged vehicle tyres/tyre valves are perilous. Keep a minimum
jet distance of 30cm during cleaning.
• WARNING: There is a risk of kickback and sudden torque load against
the jet spray when the spray gun is opened. Ensure that you are standing
rmly and that you are holding the gun securely, otherwise you could
injure yourself or other people.
Warning: The appliance is not designed for connecting to tap water. Use a
backow preventer in accordance with EN12729 type BA or EN 61770 with
a one-way valve .Water that has own through the backow preventer is
classied as undrinkable.
NOTE: Regarding the information pertaining to the connection to the
potable water mains, length and quality of the water supply hose, thanks
to refer to the assembly manual enclosed in the package.
149
EN EN
To Next Page
Loading...
Need help?
General
