254
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN
7.2 STORE THE LITHIUM BATTERIES
Illustration
6.1
Please make sure that the battery power level is as recommended in the battery instruction manual.
Please refer to the battery instruction manual for further details.
8. MAINTENANCE
DANGER! Risk of injury due to electric shock.
Remove the battery pack before adjusting, inspecting,
cleaning or storing the product.
8.1 CLEANING
Illustration
5.1
to
5.4
Wipe o the housing and the plastic components using a moist, soft cloth. Do not use strong solvents
or detergents on the plastic housing or plastic components. Certain household cleaners may cause
damage, and may cause a shock hazard.
8.2 CLEANING THE BLADE
Illustration
5.2
and
5.4
WARNING! Wear safety gloves when working on the cutting
device and close to it! Use appropriate tools to remove debris,
e.g. a brush or wooden stick! Never use your bare hands! The
replacement of the cutting device should be done by a
quali ed specialist! Rework or sharpening blades is not
recommended unless it is done by a repair service or a
similarly quali ed specialist!
Keep the blade 2 clean and free of debris.
Remove trimmings.
Apply a small amount of suitable lubricant on the blade 2 to retain a good cutting performance.
Keep the blade 2 sharp. Have a worn or damaged cutting device replaced with a new one of the same
type by a quali ed specialist.
To Next Page
Loading...
