EasyManua.ls Logo

STERWINS 400 LI-2 - User Manual

STERWINS 400 LI-2
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
2015/06
400 LI-2
400 LI X-2
3 276004 549440
3 276005 045057
FR / Caractéristiques
ES / Características
PT / Características
IT / Caratteristiche
EL / Χαρακτηριστικά
PL / Charakterystyki
RU / Характеристики
UK / Характеристики
RO / Specificaţii
EN / Characteristics
Traduction de la version originale du mode d’emploi / Traducción de las Instrucciones originales / Tradução das Instruções Originais / Traduzione delle istruzioni
originali / Μετάφραση των πρωτότυπων οδηγιών / Tłumaczenie instrukcji oryginalnej / Перевод оригинала инструкции / Переклад оригінальної інструкції /
Traducerea instrucţiunilor originale / Original Instructions Lawnmower

Questions and Answers

  • E
    eileenlopezAug 3, 2025
    Why my STERWINS 400 LI-2 Lawn Mower does not start?
    • E
      Erin HaysAug 3, 2025
      If your STERWINS Lawn Mower doesn't start, it could be due to a low battery charge, so try recharging it. Alternatively, the battery might no longer hold a charge or function correctly, in which case you should replace the battery.
  • B
    Brandy GarnerAug 8, 2025
    Why does my STERWINS 400 LI-2 Lawn Mower vibrate at high speed?
    • S
      Sydney PenningtonAug 8, 2025
      If your STERWINS Lawn Mower is vibrating at high speed, there might be several reasons. The blade could be out of balance or worn, suggesting it's time for a replacement. Another possibility is a twisted motor shaft; in this case, turn off the motor, inspect the mower, and have it repaired by an approved repair center. Also, check if the cutting height is too low and raise it if necessary.
  • A
    Anne YuAug 12, 2025
    What to do if my STERWINS 400 LI-2 is hard to push?
    • C
      Christine CarrAug 12, 2025
      If your STERWINS Lawn Mower is difficult to push, it might be because the grass is too long, the rear panel of the mower and the blade are dragging in very dense grass, or the cutting height is set too low. Try raising the cutting height to resolve this issue.
  • A
    Alison MitchellAug 17, 2025
    Why are grass cuttings not collected properly in the grass box of my STERWINS 400 LI-2?
    • M
      Martin HardyAug 18, 2025
      If the grass cuttings are not being collected properly in the grass box of your STERWINS Lawn Mower, it is likely that the cutting height is set too low. To resolve this, simply raise the cutting height.
  • K
    Katrina PerezAug 22, 2025
    How to fix uneven cutting with my STERWINS 400 LI-2?
    • K
      Kathleen HaleAug 23, 2025
      If your STERWINS Lawn Mower cuts unevenly, it could be because the grass is not uniform or thick, or the cutting height was not correctly adjusted. To fix this, check the height of the wheels and ensure all wheels are set to the same cutting height, allowing the mower to cut evenly.
  • C
    Carly HoffmanAug 27, 2025
    What to do if mulching is not done correctly with STERWINS 400 LI-2 Lawn Mower?
    • N
      nicholasfullerAug 27, 2025
      If mulching is not being done correctly with your STERWINS Lawn Mower, it's likely that the grass cuttings are damp and sticking to the mower. In this case, wait for the lawn to dry before mowing.

Summary

Safety Instructions

Symbols

Instructions for Use

Assembly

Steps for fitting the grass box and mulching plug.

Starting the mower

Procedure for safely starting the lawnmower.

Preparation

Essential checks and precautions before mowing.

Operation

Guidelines for mowing, balance, and slopes.

Maintenance and Storage

Instructions for upkeep and putting the mower away.

Troubleshooting Guide

Technical Specifications

Environment

Guarantee

Detailed View

CE Compliance Declaration

STERWINS 400 LI-2 Specifications

General IconGeneral
Voltage40 V
Cutting width40 cm
Collection capacity50 L
Cutting Height AdjustmentCentral
Cutting Height Range25-75 mm

Related product manuals