12
RU
KZ
EN
• Injuries may be caused or aggravated by prolonged use of a tool. When using any tool
for prolonged periods, ensure you take regular breaks.
• Prolonged use of the product exposes the user to vibrations that can cause a range of
conditions collectively known as hand-arm vibration syndrome (HAVS) e.g. ngers going
white; as well as specic diseases such as carpal tunnel syndrome.
• To reduce this risk when using the product, always wear protective gloves and keep your
hands warm.
3. TECHNICAL DATA
Model 40ECS1-2000.1
Power level 2000W
Voltage 220V
Frequency 50Hz
Machine weigh 3.6kg
Chain reference
Chain gauge
Chain pitch
Guide bar model YS16-56-507P
Guide bar length 40cm
Cutting capacity 37cm
Guide bar width 1.3mm
Oil type Anti-wear hydraulic oil
Oil control Automatic
Oil tank capacity (cm^3) 120 cm
3
Chain speed (m/s) No load : 14 m/s
No-load speed (min-1) 7500
Guaranteed sound power level (dB(A))
Measured sound power level (dB(A))
No load current 5A
Maximum current
IP Degree IP2X
Max Vibration level (K=1.5m/s2)
Max Sound Pressure Level
The declared vibration total value has been measured in accordance with a standard test method and
may be used for comparing one tool with another. The declared vibration total value may also be used in
a preliminary exposure assessment. The vibration emission during actual use of the power tool can dier
from the declared total value depending on the ways in which the tool is used; and it may be necessary
to identify safety measures to protect the operator that are based on an estimation of exposure in the
To Next Page
Loading...
Need help?
General
