1. SAFETY INSTRUCTIONS
gTo reduce the impact of noise and vibration emission, limit the
time of operation, use low-vibration and low-noise operating
modes as well as wear personal protective equipment.
gTake the following points into account to minimise the vibration
and noise exposure risks:
gOnly use the product as intended by its design and these
instructions.
gEnsure that the product is in good condition and well maintained.
gUse correct cutting device for the product and ensure they in good
condition.
gKeep tight grip on the handles/gripping surface.
gMaintain this product in accordance with these instructions and
keep it well lubricated (where appropriate).
gPlan your work schedule to spread any high vibration tool use
across a longer period of time.
Even if you are operating this product in accordance with all the
safety requirements, potential risks of injury and damage remain.
The following dangers can arise in connection with the structure
and design of this product:
gHealth defects resulting from vibration emission if the product is
being used over long periods of time or not adequately managed
and properly maintained.
gInjuries and damage to property due to broken application tools or
the sudden impact of hidden objects during use.
gDanger of injury and property damage caused by ying objects.
CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out,this appliance must not be
supplied through an external switching device, such as a timer, or
262
FR
ES
PT
IT
EL
PL
RU
EN
KZ
UA
RO
To Next Page
Loading...
