183
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
Problems Probable causes Solutions Qualification
The product
suddenly stops
Electrical cable is out of
service
Visual check of the
cable and change it
CUSTOMER
The motor protection
has blocked the machine
because of overload
Wait a few minutes
for the engine to cool
down
CUSTOMER
Vibration
Nuts / screws are not
well tight
Screw the nut(s) /
screw(s)
CUSTOMER
The line is not cut
properly
The blade on the guard is
out of service
Change the guard CUSTOMER
The guard is broken Change the guard CUSTOMER
6.6 FATAL CIRCUMSTANCES : CRITICAL ISSUES
Problems Solutions
The machine smokes during operation
Immediately stop the machine, Disconnect
the power plug then speak to service
center
7. END OF LIFE
Electrical products should not be discarded with household products. Used electrical
products must be collected separately and disposed of at collection points provided for
this purpose. Talk with your local authorities or dealer for advice on recycling.
To Next Page
Loading...
Need help?
General