To Next Page

To Previous Page

gDo not tilt the machine when switching on the motor, except

if the machine has to be tilted for starting. In this case, do not

tilt it more than absolutely necessary and lift only the part,

which is away from the operator.

gDo not start the machine when standing in front of the

discharge opening.

gDo not put hands or feet near or under rotating parts.

gKeep clear of the discharge opening at all times.

gDo not transport the machine while the power source is

running.

gStop the machine, and remove the disabling device. Make

sure that all moving parts have come to a complete stop

whenever you leave the machine, before clearing blockages

or unclogging chute, before checking, cleaning or working on

the machine, after striking a foreign object.

gInspect the machine for damage and make repairs before

restarting and operating the machine; if the machine starts to

vibrate abnormally (check immediately), inspect for damage,

replace or repair any damaged parts, check for and tighten any

loose parts.

gPull the plug from the socket:

- Whenever you leave the machine;

- Before clearing a blockage;

- Before checking, cleaning or working on the appliance; after

striking a foreign object. Inspect the appliance for damage and

make repairs as necessary; if the appliance starts to vibrate

abnormally (check immediately).

gKeep all nuts, bolts, and screws tight to be sure the appliance

is in safe working condition.

gCheck the grass box frequently for wear or deterioration.

SAFETY INSTRUCTIONS

221221

STERWINS ELM2-46SP.4 User Manual

Questions and Answers: