EasyManua.ls Logo

STERWINS ST3 - Technical Data

STERWINS ST3
226 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
198
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
Recycling code of paper.
XX
Guaranteed sound power level
(tested according to Directive
2000/14/EC as amended by
2005/88/EC).
Please refer to the corresponding illustration at the end of the booklet.
3. TECHNICAL DATA
Model HPC STERWINS - EPW2-ST3.5
Power (W) 2200
Voltage (V) 220-230 V ~
Frequency 50 Hz
IP level IPX5
Protection class Class II
Hose length 6m
Minimum inlet flow rate 0.3 MPa
Maximum input temperature 40°C
Maximum inlet flow rate 0.6 MPa
Nominal pressure 11 MPa
Maximum pressure 15 MPa
Flow rate 5.3 l/min
Maximum flow rate 7.5 l/min
Sound power level
(Guaranted + Measured)
LWA: 85 dB(A) + LWA: 84.6 dB(A)
KWA: 1.88 dB(A)
Sound pressure level
(Guaranted + Measured)
LPA: 73 dB(A) + LPA: 72.8 dB(A)
KPA: 3.0 dB(A)
Vibration Level
(Guaranted + Measured)
ah < 2.5 m/s², K=1.5 m/
Gross + Net Weight 9.4 kg + 8.2 kg
The sound values have been determined according to noise test code given in EN 60335-2-79 ,
using the basic standards EN ISO 3744.
The sound intensity levels for the operator may exceed 85 dB(A) and ear protection measures
are necessary.
The noise figures quoted are emission levels and are not necessarily safe working levels. Factors
that influence the actual level of exposure of work-force include the characteristics of the work
room, the other sources of noise, etc. i.e. the number of machines and other adjacent processes,
and the length of time for which an operator is exposed to the noise. Also the permissible
exposure level can vary according to your country. This information, however, will enable the
user of the machine to make a better evaluation of the hazard and risk.
89

Related product manuals