Steve Silver HE500PT - Assembly Instructions; Step 1: Attach Mounting Plate to Table Top; Step 2: Attach Mounting Plate to Leg Frame; Step 3: Connect Leg Frame to Table Top

HE500PT
ASSEMBLY INSTRUCTIONS
P. 2/5
STEP 1
Step 2: Attach Mounting Plate A (D) to Leg Frame (C) by using Long Bolt (1), Lock Washer (3), Flat Washer (4). Tighten
with Wrench (5). Repeat to attach remaining piece of Mounting Plate A (D) to Leg Frame (C).
Step 1: Turn Table top (A) upside down on the floor with a piece of cloth or carpet underneath to prevent finish from
scratching. Attach Mounting Plate B (E) to Table top (A) by inserting Long Bolt (1), Lock Washer (3), Flat Washer (4) into
holes on Mounting Plate B (E) and wooden glide, secure with Wrench (5)
Step 3: Attach Mounting Plate A (D), Leg Frame (C) to Table Top (A) by inserting Long Bolt (1), Lock Washer (3), Flat
Washer (4) into holes on wooden glide. Tighten with Wrench (5).
1
3
4
5
1
3
4
5
1
3
4
5
A
E
D
C
STEP 2
STEP 3