Steve Silver HE500PT - Step 4: Attach Stretcher; Step 5: Final Assembly and Leaf Insertion

P. 3/5
HE500PT
ASSEMBLY INSTRUCTIONS
ON
OFF
Step 5: Turn the table to the upright position. Unlock the latch underneath of the Table Top(A). Pull the Table Top(A) from
both ends, place Leaf (B) in position. Lock the latch underneath of the table top to prevent from sliding. Assembly product is
now completed.
Step 4: Attach Stretcher (F) by securing position G of Stretch (F) to Mounting Plate B (E) and position H to Leg Frame (C)
with Short Bolt (2), Lock Washer (3), Flat Washer (4) and Wrench (5).
G
H
2
3
4
F
B
STEP 4
STEP 5