Product Size: 33.1” ×30.3” × 33.5”H
Page 3
STEP 4:
STEP 3:
STEP 5: Attach the outside back across the bottom rear of each seat rail with the pre attached Velcro.
The headrest leadwires are color coded and labeled Headrest.
The headrest leadwires are yellow.
Attach the leadwires found at the bottom of motion back to the leadwires at the rear of seat.
Yellow to Yellow. Make sure to close the clip locks to assure the connections will not come
loose during use.
Slide the metal inserts on recliner’s Left wing(C)and Right wing (D) into the metal sleeves on
the side of the recliner’s back. Slide the wings down until they are completely set on the backs
metal sleeves.
C
D
Deep & Shallow Storage
2 ×Manual Hidden Cup Holder
Pull to open the hidden cup
holder compartment
Push to close the hidden cup
holder compartment
1
To Next Page
Loading...