Need help?Do you have a question about the STEYR MOTORS SE156E26 and is the answer not in the manual?
General| Brand | STEYR MOTORS |
|---|---|
| Model | SE156E26 |
| Category | Engine |
| Language | English |
General safety guidelines for operating and servicing the engine.
Introduction to the manual and its purpose.
Overview of the manual's purpose and scope.
Technical data and specifications for 4-cylinder marine engines.
Technical data and specifications for 6-cylinder marine engines.
Information on product references, illustrations, and specifications.
Guidance on insuring STEYR MOTORS engines and boats.
Information regarding stolen engines and serial numbers.
Details on the warranty registration process.
Information regarding dealer services and maintenance.
Explanation of symbols used in illustrations.
Information on obtaining repair services from dealers.
Guidance on using original replacement parts.
Pre-departure checks and preparations.
Procedure for handling engines submerged in water.
Recommendations for antifouling paint for boat bottoms.
Impact of boat bottom condition on performance.
Owner's responsibilities for safe boating practices.
Information related to personal safety of operator and passengers.
Specific warnings, including California Proposition 65.
Explanation of various symbols used in the manual and on the engine.
Pre-operation checks and familiarization with boat handling.
Procedure for starting the engine using a key switch.
Procedure for stopping the engine.
Procedure for starting the engine using push buttons.
Procedure for stopping the engine using push buttons.
Procedure for running in engines after major overhaul.
Definitions of technical terms related to engine operation.
Step-by-step guide for engine procedures and work.
Instructions for the engine break-in period.
Guidelines for operating the engine after the break-in period.
Instructions on shifting gears and controlling speed.
Operating instructions for remote control systems.
Detailed guide on shifting and speed control.
Tips for improving fuel economy.
Information regarding the gearbox.
Information on the fixed speed switch.
Description of the instrument panel with key switch.
Indications on the instrument panel during normal operation.
Description of the instrument panel with push buttons.
Indications on the push-button instrument panel.
Operation and importance of the emergency cut-off switch.
Explanation of warning lights and audible alarms.
Function and role of the Electronic Engine Control Unit.
Overview of the engine's diagnostic system.
Considerations for twin engine installations and counter-rotation.
Information on available propeller options.
Details on propeller types and identification.
Forces created by propeller torque and their effects.
Guidance on propeller maintenance and handling.
Information on water jet drives.
Procedure for operating the engine in freezing temperatures.
Recommendations for operating in salt water.
Limitations for operating the engine at high altitudes.
Description of the electric fuel pump operation.
Procedures for checking the fuel system.
Information on fuel contamination and prevention.
Description of the closed and open cooling circuits.
Overview of the engine's electrical equipment.
Details on the alternator and its function.
Specifications and care for the engine battery.
Protection of 4-cylinder engines with circuit breakers and fuses.
Protection of 6-cylinder engines with circuit breakers and fuses.
Function and safety of the inversion switch.
Function of crankshaft housing ventilation.
Information on the standard instrument panel.
Specifications for required diesel fuel according to EN 590.
Factors influencing fuel selection for engine performance.
Maintenance and service for fuel pre-filters and water separators.
Guidance on engine lubrication and recommended lubricants.
Specifications and recommendations for engine oil.
Explanation of engine oil identification symbols.
Proper disposal methods for automotive waste products.
Location and importance of engine model and serial numbers.
Technical data for specific MO 4-cylinder engine models.
Technical data for specific MO 4-cylinder engine models.
Technical data for specific SE 4-cylinder engine models.
Technical data and overview for SE series engines.
Maintenance schedule for MO series engines.
Maintenance schedule for SE series engines.
Log for recording maintenance performed on the engine.
Troubleshooting guide for instrument panel error indications.
Troubleshooting guide for SOLAS instrument panel errors.
List of service codes and their meanings for SE engines.
List of failure codes and their meanings for MO engines.
Diagnostic chart for common engine problems and solutions.
Procedure for checking engine oil levels.
Instructions for refilling engine oil.
Checking and refilling power steering oil.
Checking and refilling transmission oil.
Procedure for checking coolant in the closed circuit.
Procedure for draining the raw water circuit.
Checking the raw water connection.
Procedure for draining the cooling water circuit.
Information on cooling system anodes and their inspection.
Guidance on anti-corrosion anodes for electronic equipment.
Factors for selecting the correct propeller for optimal performance.
Steps for preparing the engine for off-season storage.
Procedure for starting the engine after storage.
Details of the limited engine warranty terms and conditions.
List of products and accessories covered by the warranty.
Steps required to activate the engine warranty.
Coverage details for the base engine warranty.
Warranty coverage for extended major engine components.
Table summarizing warranty coverage and repair costs.
Terms and conditions for warranty coverage.
Specific limitations and exclusions under the warranty.
Steps for submitting a warranty claim.
Legal jurisdiction and applicable laws for the warranty.
Procedure for addressing unsatisfactory warranty service.
Form and process for warranty registration approval.
To Next Page
