Need help?Do you have a question about the STEYR MOTORS SE266E40 and is the answer not in the manual?
General| Number of Cylinders | 4 |
|---|---|
| Fuel System | Common rail direct injection |
| Cooling System | Liquid-cooled |
| Engine Type | 4-stroke diesel engine |
| Displacement | 2.1 l [128 cu in] |
General safety advice for engine operation and maintenance.
Specific warnings about hazards and safety measures.
Introduction to the manual's scope and usage.
Explains symbols used in the manual for clarity.
Technical specifications for 4-cylinder engine models.
Technical specifications for 6-cylinder engine models.
Information on product references and specifications.
Process for registering the engine warranty.
Services provided by dealers for maintenance.
Guidelines for engine repair services.
Actions to take if the engine is submerged.
Responsibilities of the boat owner and operator.
Explanations of various symbols used in the manual.
Pre-operation checks and procedures before starting the engine.
Procedure for starting the engine using a key switch.
Procedure for stopping the engine.
Instructions for the engine break-in period for optimal performance.
How to shift gears using the control system.
Operating the engine's remote control system.
Methods for shifting and controlling engine speed.
Layout and functions of the instrument panel with key switch.
How instruments indicate normal engine operation.
Layout and functions of the instrument panel with push-button start.
Instrument indications for push-button start operation.
Operation and importance of the emergency cut-off switch.
How warning lights and alarms indicate engine status.
Functions and role of the ECU in engine management.
How the ECU performs self-diagnostics and error reporting.
Setup and considerations for twin engine installations.
Information on propeller types and selection.
Specifications for the required fuel type and quality.
Procedures for maintaining fuel filters.
Guidelines for engine oil and lubrication.
Proper disposal methods for waste products.
Location and importance of model and serial numbers.
Detailed technical specifications for specific MO engine models.
Detailed technical specifications for specific MO engine models.
Detailed technical specifications for specific SE engine models.
General technical specifications for SE engine series.
Scheduled maintenance tasks for MO engines.
Scheduled maintenance tasks for SE engines.
Interpreting error indications on the instrument panel.
Error codes and their meanings for SE engines.
Failure codes and their meanings for MO engines.
A guide to diagnosing and resolving common engine problems.
Procedure for checking engine oil level.
Procedure for refilling engine oil.
Coolant check procedure.
Draining the raw water system.
Checking connections.
Draining the cooling water system.
Maintenance and inspection of cooling system anodes.
Information on anti-corrosion anodes for protection.
Maintenance and replacement of the air filter.
Procedure for checking and adjusting engine alignment.
Guidance on selecting the appropriate propeller for performance.
Engine storage procedures.
Procedures for starting the engine after storage.
General terms and conditions of the limited engine warranty.
Steps required to activate the engine warranty.
Details of the base warranty coverage for the engine.
Warranty coverage for major engine components.
An overview of the warranty coverage provided.
Conditions and parts not covered by the warranty.
Steps for submitting a warranty claim.
Information on authorized service partners and dealers.
To Next Page
