Need help?Do you have a question about the STEYR MOTORS MO286H43 and is the answer not in the manual?
General| Number of Cylinders | 6 |
|---|---|
| Fuel System | Common Rail Direct Injection |
| Engine Type | Diesel |
| Cooling System | Liquid-cooled |
| Emission Standard | EPA Tier 3 |
| Power Output | 286 HP (213 kW) |
Overview of the manual's purpose and scope for STEYR MOTORS marine engines.
Details on product references, specifications, and country-specific regulations.
Guidance on insuring the engine and owner identification card details.
Installation logs, dealer maintenance, and illustration symbols explanation.
Information on repair services, parts, and pre-operation checks.
Procedures for engine submersion, bottom painting, and boat hull condition.
Owner's responsibilities and general safety guidelines for boat operation.
Explanation of various technical and safety symbols used in the manual.
Pre-start checks including bilge, water intake, fuel, and fluid levels.
Step-by-step guide for starting and shutting down the engine.
Specific starting and stopping procedures for SOLAS variants.
Detailed steps for running in an engine after a major overhaul.
Guidance for the first 20 running hours to ensure performance and longevity.
Recommended operating speeds and procedures after the break-in period.
Procedures for shifting gears and controlling engine speed via the lever.
Instructions for operating single and dual lever remote controls.
Shifting, fuel economy, gearbox info, and high altitude operation details.
Identification and function of gauges and indicators on the standard instrument panel.
How instrument readings change during normal operation.
Specifics of the instrument panel for SOLAS models.
Instrument indications for SOLAS models during operation and errors.
Proper use of the emergency cut-off switch.
Understanding warning lights and audible alarms.
Function of the ECU and power reduction causes.
Overview of the engine diagnostic system and error reporting.
Information on twin installations, optional propellers, and propeller types.
Propeller care, water jets, and operation in freezing/salt water.
Fuel pump operation, system checks, and contamination prevention.
Explanation of closed and open cooling circuits and their components.
Details on alternator, battery requirements for 4 and 6 cylinder engines.
Information on circuit breakers, fuses, and electrical system connections.
Inversion switch, ventilation, instrument panel, and dry operation checks.
Guidelines for selecting and using diesel fuel for optimal performance and economy.
Recommended motor oils, ACEA/API specifications, and oil identification symbols.
Guidelines for the proper disposal of fuel, oil, and other automotive waste products.
Location of engine and gearbox model/serial numbers for warranty and parts ordering.
Detailed technical specifications for the STEYR MOTORS MO54NA33 marine engine.
Technical data for MO84K32, MO94K33, MO114K33, MO144V38 engines.
Technical data for MO144M38, MO164M40, MO174V40 engines.
Technical data for MO126M28, MO166K28, MO196K35, MO236K42 engines.
Technical data for MO256K43, MO256H45 engines.
Detailed technical specifications for the STEYR MOTORS MO286H43 marine engine.
Detailed technical specifications for the STEYR MOTORS MO306H43WJ marine engine.
Section for recording service history and important maintenance notes.
Schedule of daily, monthly, and periodic maintenance tasks for various systems.
Log pages for recording service details like commissioning, hours, and tune-ups.
Table detailing error indications, faults, and remarks for the instrument panel.
Table detailing error indications, faults, and remarks for SOLAS instrument panels.
Procedures for entering, reading, and clearing stored engine error codes.
List of principle failure codes, abbreviations, devices, and possible causes.
A chart to diagnose and resolve common engine symptoms and problems.
Description of components used in the wiring harness and their functions.
Electrical wiring diagrams for various engine configurations and instrument panels.
Procedures for checking and refilling motor oil, power steering, and transmission oil.
Steps for checking coolant, draining raw water circuit, and checking raw water.
Maintenance of cooling system anodes and anti-corrosion anodes.
Procedures for maintaining the air filter and poly-V belts.
Detailed instructions for adjusting alternator, servopump, and raw water pump belts.
How to select the correct propeller for optimal engine performance and economy.
A comprehensive checklist for dealers to follow during engine installation and delivery.
Form for recording installation details, measurements, and customer handover.
Steps for preparing the engine for storage and for starting it after storage.
Log pages for recording engine service history, inspections, and tune-ups.
Details on limited warranty, owner registration, and engine warranty coverage.
Explanation of warranty coverage for pleasure/commercial use, and limitations.
Recording identification numbers, and advice on replacement parts.
Forms for warranty registration, dealer records, and owner identification.
Contact information for STEYR MOTORS GmbH and service network details.
To Next Page