Need help?Do you have a question about the STI STI-3360 and is the answer not in the manual?
Slide the back cover off the sensor unit and install the battery.
Plug the chime unit into a 120 VAC electrical outlet.
Press and release the program button on the chime unit to begin the pairing process.
Hold the sensor button for 5 to 10 seconds until the receiver beeps.
Press and release the sensor button to scroll through available sounds.
Hold the sensor button for 5 to 10 seconds to save the chosen sound.
Slide the back cover off the sensor unit and install the battery.
Plug the chime unit into a 120 VAC electrical outlet.
Press and release the program button on the chime unit to begin the pairing process.
Hold the sensor button for 5 to 10 seconds until the receiver beeps.
Press and release the sensor button to scroll through available sounds.
Hold the sensor button for 5 to 10 seconds to save the chosen sound.
General| Brand | STI |
|---|---|
| Model | STI-3360 |
| Category | Intercom System |
| Language | English |
To Next Page
