Need help?Do you have a question about the Stid ARCS-B/BT1 and is the answer not in the manual?
Details the acceptable input voltage range and typical voltage for the device.
Lists the power consumption for different reader models at 12 Vdc.
Specifies suitable cable types and lengths for screw terminal and cable outputs.
Details how default reader settings are stored and applied via UHF technology.
Outlines the initialization sequence and LED indicators upon reader power-up.
Covers supply voltage, interference, spacing, metal mounting, cable use, and power off.
Details Baud rate, mode, bits, transfer, stop bit, and bus architecture.
Step-by-step guide for installing SE6 (biometric) or SE8 (125 kHz) modules.
General| Frequency | 13.56 MHz |
|---|---|
| Device Type | RFID reader |
| Communication Interface | USB, Bluetooth |
| Operating System Compatibility | Android |
| Power Supply | USB |
To Next Page
