Need help?Do you have a question about the Stid ARCS-A/BT1 and is the answer not in the manual?
Details the voltage range and maximum consumption for powering the readers.
Describes the detection of reader tampering via an accelerometer and its output.
Explains how default reader settings are stored and applied.
Covers configuration methods using SCB or SECard for read-only readers.
Offers advice for optimal performance and handling of biometric sensors and keypads.
Provides essential guidelines for reader installation, including electrical and environmental factors.
Details the steps for physically mounting the reader base and securing the unit.
Procedure for integrating optional biometric or 125 kHz modules into the reader.
To Next Page
General