To Next PageTo Next Page
Need help?Do you have a question about the STIEBEL ELTRON DHC 6 and is the answer not in the manual?
General| Power | 6 kW |
|---|---|
| Voltage | 230 V |
| Amperage | 26 A |
| Temperature Rise | 35°C |
| Weight | 2.5 kg |
| Maximum Flow Rate | 3.5 l/min |
| Protection Rating | IP25 |
| Type | Tankless |
| Application | Point-of-use |
| Phase | Single Phase |
| Water Connection | 1/2 inch |
| Dimensions | 200 x 85 x 130 mm |
| Power Supply | Single Phase |
| Dimensions (H x W x D) | 200 x 85 x 130 mm |
| Connection | 1/2 inch |
| Temperature Range | 30°C to 60°C |
Instructions for safe operation, consequences of failure, and prevention steps.
Explanation of symbols used in the documentation for general information.
Specifies that all measurements are in mm unless otherwise stated.
Covers crucial safety advice, including warnings about scalding and child usage.
Details the appliance's purpose and intended domestic or small business use.
Provides essential safety guidelines applicable during operation.
Directs users to check the type plate for test symbols.
Explains the function of the hydraulically controlled instantaneous water heater.
Describes how the heating system starts and heats water when the DHW valve is opened.
Provides guidelines on cleaning, maintenance, and checking electrical safety.
Lists common problems, their causes, and remedies for the appliance.
Emphasizes using original accessories/spare parts for trouble-free function and operational reliability.
General safety instructions for installation contractors.
Advises observance of all applicable national and regional regulations and instructions.
Details the standard delivery contents and available accessories.
Lists items included in the standard delivery of the appliance.
Lists available accessories like pressure-tested taps for the appliance.
Covers water line flushing, safety valve absence, and flow rate requirements.
Covers water line flushing, safety valve absence, and flow rate requirements.
Specifies allowed materials for cold water inlet and DHW outlet pipes.
Recommends using suitable taps and not open taps.
Details requirements for the installation location, like being frost-free and vertical mounting.
Describes the default preparation of appliances for delivery and installation.
Details mounting the appliance on the wall and specific installation methods for different models.
Provides critical warnings about electrocution risk and requirements for electrical connection.
Outlines alternative installation methods for specific DHC models, including power and water connections.
Describes the final steps of fitting the appliance cover and securing it with a screw.
Details the process of commissioning the appliance, emphasizing authorised personnel and safety.
Explains steps for recommissioning after a water supply interruption to prevent system damage.
Instructs on how to safely isolate and drain the appliance for shutdown.
Lists common operational problems, their causes, and required remedies.
Covers safety precautions before maintenance and the process for draining the appliance.
Provides technical details, dimensions, connections, and wiring diagrams.
Explains how to limit the flow rate to achieve higher outlet temperatures.
Describes how to clean the fitted sieve after removing the cold water connection pipe.
Shows alternative connection configurations for different DHC models.
Illustrates the electrical connections for different DHC models.
Details appliance temperature increases yielded at a mains voltage of 230 V.
Provides information on where the appliance is suitable for use.
Product data complies with EU regulations relating to the ecodesign of energy-related products.
Presents comprehensive technical specifications and data for various DHC models.
