To Next PageTo Next Page
Need help?Do you have a question about the STIEBEL ELTRON DHC 8 and is the answer not in the manual?
General| Power Rating | 8 kW |
|---|---|
| Phase | Single |
| Amperage at 240V | 33.3 A |
| Amperage at 208V | 38.5 A |
| Minimum Required Breaker Size | 40 A |
| Minimum Wire Size | 8 AWG |
| Activation Flow Rate | 0.4 GPM |
| Water Connection | 1/2" NPT |
| Protection class | IP25 |
| Maximum operating pressure | 150 psi |
| Type | Tankless |
| Application | Point-of-use |
| Voltage | 240 V |
Explains safety instruction structure and keywords.
Identifies symbols used in the documentation.
States that measurements are in mm unless otherwise noted.
Describes the intended purpose and scope of use for the appliance.
Provides crucial safety warnings for appliance operation and user safety.
Refers to type plate for test symbols.
Stresses using original accessories and spare parts for reliable function.
Advises observance of applicable national and regional regulations.
Details requirements for water pipe materials and safety valves.
Specifies suitable locations and mounting orientation for the appliance.
Describes the default configuration of the appliances upon delivery.
Details alternative mounting and connection methods for specific models.
Covers final steps like fitting covers and securing screws.
Step-by-step guide for initial startup and checks.
Instructions for recommissioning after water supply interruption.
Provides instructions on how to drain the appliance for maintenance or frost protection.
Details the physical size and connection points of the appliance.
Illustrates the electrical connections and circuit layout.
Explains how appliance temperature increases are achieved.
Outlines the intended applications for the water heaters.
Presents product data on energy consumption according to EU regulations.
Contains comprehensive technical data for all models in a tabular format.
