EasyManua.ls Logo

STIEBEL ELTRON DHC 3-2 - User Manual

STIEBEL ELTRON DHC 3-2
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATION AND INSTALLATION
OPERACIÓN E INSTALACIÓN
UTILISATION ET INSTALLATION
Tankless Electric Water Heater
Calentador de Agua Instantaneos sin Tanque
Chauffe-Eau Électrique sans Accumulateur
» DHC 3-1
» DHC 3-2
» DHC 4-2
» DHC 4-3
» DHC 5-2
» DHC 6-2
» DHC 8-2
» DHC 9-3
» DHC 10-2
Conforms to ANSI/UL Std. 499
Certified to CAN/CSA Std. E335-1 & E335-2-35
Conforme a ANSI/UL Std. 499
Certificación con CAN/CSA Std. E335-1 & E335-2-35
Conforme à la norme ANSI/UL Std. 499
Certifié à la norme CAN/CSA Std. E335-1 & E335-2-35
Tested and certified by WQA to NSF/ANSI372
for lead free compliance.
Probado y certificado por WQA NSF/ANSI 372 para
el cumplimiento de las regulaciones sin plomo.
Testé et certifié par WQA à la NSF/ANSI 372 pour une
utilisation sans plomb.

Table of Contents

Other manuals for STIEBEL ELTRON DHC 3-2

Preview: Installation Instructions
Installation Instructions16 pages

Questions and Answers

  • J
    Jesse BraunAug 12, 2025
    Why is my STIEBEL ELTRON DHC 3-2 clicking but not heating?
    • K
      Kristie CollierAug 12, 2025
      If your STIEBEL ELTRON Water Heater isn't providing hot water, but you hear a clicking sound, the problem could be a tripped circuit breaker. Try turning the circuit breaker on. Alternatively, the safety thermal cut-out may have tripped; in this case, reset the thermal cut-out.
  • M
    meghan50Aug 22, 2025
    How to fix a STIEBEL ELTRON DHC 3-2 Water Heater that is not warm enough?
    • D
      Donald StricklandAug 22, 2025
      If the water from your STIEBEL ELTRON Water Heater isn't warm enough, it could be due to a high water flow. Try reducing the water flow and closing the flow adjustment screw. It could also be that the voltage is too low, so ensure the unit is receiving the correct voltage.
  • J
    judith33Sep 1, 2025
    What to do if my STIEBEL ELTRON Water Heater has no hot water and no audible click?
    • D
      Donald SimsSep 1, 2025
      If your STIEBEL ELTRON Water Heater isn't producing hot water and you don't hear a click, the issue might be due to low water flow preventing the flow switch from activating. Try cleaning the faucet aerator. Also, ensure the shut-off valve is completely open. You may also need to open the flow adjustment screw or clean the filter screen at the DHC unit.

STIEBEL ELTRON DHC 3-2 Specifications

General IconGeneral
BrandSTIEBEL ELTRON
ModelDHC 3-2
CategoryWater Heater
LanguageEnglish

Related product manuals