To Next PageTo Next Page
Need help?Do you have a question about the STIEBEL ELTRON DHC 6 EC and is the answer not in the manual?
General| Type | Instantaneous Water Heater |
|---|---|
| Power Rating | 6 kW |
| Voltage | 230 V |
| Amperage | 26 A |
| Wattage | 6000 W |
| Minimum Required Breaker | 30 A |
| Power Supply | Electric |
| Protection Class | IP 25 |
| Phase | Single Phase |
| Water Connection | 1/2" |
| Material | Plastic |
Details the process of mounting the water heater near a bath or sink.
Explains how to use a template for accurate hole drilling during installation.
Illustrates the electrical connections for the water heater unit.
Describes the procedure for securely mounting the unit on a wall.
Provides a detailed breakdown of the internal components of the water heater.
Covers the essential steps and preparations required for installing the water heater.
Details how to connect water pipes when a concealed pipe system is used.
Explains the process for connecting water pipes to a wall-mounted unit.
Introduces the electronic instantaneous water heater and its basic function.
Guides users on how to operate the water heater, including temperature adjustment.
Identifies and describes the external parts and controls of the water heater.
Explains the function, testing, and reset procedures for the ELCB safety device.
Details the initial startup procedure for the water heater by an expert technician.
Instructs on how to adjust water flow to achieve the desired temperature.
Lists key technical specifications, power ratings, and dimensions of the unit.
Outlines relevant regulations and provisions that must be observed during installation and use.
Highlights crucial points and considerations for safe and proper operation.
Specifies the recommended location for installing the water heater to prevent freezing.
Provides guidelines for cleaning and maintaining the water heater unit.
