To Next PageTo Next Page
Need help?Do you have a question about the STIEBEL ELTRON DHC 8 EC and is the answer not in the manual?
General| Type | Instantaneous water heater |
|---|---|
| Power Rating | 8 kW |
| Temperature Range | 30 - 60 °C |
| Wattage | 8000 W |
| Water Connection | 1/2" |
| Power Consumption | 8 kW |
| Maximum Flow Rate | 4.0 L/min |
| Protection Class | IP 24 |
| Connection | 1/2" |
| Operating Pressure | 1 - 10 bar |
Outlines the purpose of chapters and general instructions for users and installers.
Emphasizes reading instructions before use, retaining them, and passing them on to new users.
Defines safe usage for children aged 8+ and persons with reduced capabilities, including supervision rules.
Forbids children from playing with the appliance or performing unsupervised maintenance.
Illustrates installation of the water heater to a bath or sink.
Provides critical dimensions and cable length specifications for installation.
Guidance on using the installation template for accurate hole drilling.
Presents the essential wiring diagram for proper electrical hookup.
Details the steps for securely mounting the unit onto a wall.
Instructions on using the template to drill holes for mounting.
Identifies and describes all internal parts of the water heater.
Steps for preparing the unit, removing screws, and opening the casing.
Guidance on removing plugs and creating openings for water inlet connections.
Instructions for routing the electric cable and ensuring a tight, secure fit.
Details on circuit breaker requirements and connecting wires to the unit terminals.
Steps for connecting water pipes when embedded within a wall.
Instructions for connecting water pipes to a wall-mounted setup.
Steps for installing the cover, connecting the power cord, and securing the casing.
Explains the function of the electronic water heater and its operational indicator light.
How to adjust water temperature using the selector and turn on the hot water valve.
Identifies and labels external parts like control knobs, inlet/outlet pipes.
Specifies installation requirements for a closed, frost-free room.
Warning regarding disconnecting power before resetting electrical heating appliances.
Details the ELCB's purpose, monthly testing, and operational procedures.
Explains the automatic cutoff device for unusually high water temperatures.
Guidance on what to do if the unit does not operate or the thermostat cuts off.
Procedure for initial startup, involving ELCB, valves, and air expulsion.
Guidance on selecting temperature levels and a warning about high temperatures.
Notes on avoiding freezing locations and replacing damaged supply cords.
How to adjust water flow rate to achieve the desired temperature.
Presents key technical data including type, capacity, pressure, electrical, and power ratings.
Covers local power/water regulations, vertical installation, and electrical connection security.
Key points on unit flush mounting, materials, and protective earth conductor connection.
Guidance on selecting an appropriate enclosed, frost-free area.
Instructions for cleaning, maintenance by qualified personnel, and disconnecting from mains.
Refers to country-specific guarantee terms and the role of qualified installers.
States company non-liability for failures due to improper or unauthorized installation.
Addresses no hot water issues related to flow volume and ELCB activation.
Resolves issues with water flow too high or heating setting too low.
