STIEBEL ELTRON FFB 4 EU - Installation Procedures; Installation Safety Instructions; Installation Standards and Regulations; Wireless Remote Control Installation

ENGLISH
www.stiebel-eltron.com FFB 4 EU | FFB 4 Set EU | FFB 4 AP | FFB 4 Set AP | 21
INSTALLATION
Safety
INSTALLATION
6. Safety
6.1 General safety instructions
We guarantee trouble-free functional and operational reliability
only if original accessories and spare parts intended for the ap-
pliance are used.
6.2 Instructions, standards and regulations
Note
Observe all applicable national and regional regulations
and instructions.
7. Appliance description
Standard delivery
Standard delivery of the wireless remote control includes:
- Battery (inside device)
- Wall mounting bracket with adhesive pad
- For FFB4SetEU and FFB4SetAP only: Wireless module
8. Installation
The wireless remote control with wall mounting bracket is suitable
for installation on even walls (for the range within a building, see
chapter "Specification/ Data table"). The wall mounting bracket
can be fixed to smooth walls with the adhesive pad. Alternatively,
it is possible to attach the wall mounting bracket with screws.
8.1 Installing the wireless module in the
instantaneous water heater
WARNING Electrocution
Only qualified contractors are permitted to open the ap-
pliance and work on the open appliance.
!
Material losses
Electrostatically sensitive components
Observe the generally applicable guidelines for handling
electrostatically sensitive components and take suitable
protective measures.
f Isolate the instantaneous water heater from the power
supply.
f For details on opening and closing the instantaneous water
heater, see the operating and installation instructions of the
instantaneous water heater.