To Next PageTo Next PageWhat to do if STIEBEL ELTRON FFB 1 SL electronic comfort is out of range?
If your STIEBEL ELTRON remote control unit is out of range, try reducing the distance between the radio remote control unit and the heater.
Why is my STIEBEL ELTRON FFB 1 SL electronic comfort Remote Control not responding?
The instantaneous water heater might not be responding and the display on your STIEBEL ELTRON radio remote control unit might be weak due to several reasons: * **Dynamic anti-scald protection:** It goes off automatically 2 minutes after the end of drawing water. * **Low batteries:** Replace the batteries in the radio remote control unit. * **Radio remote control unit not logged into the heater:** In this case you need a qualified installer to log in the radio remote control unit.
General| Brand | STIEBEL ELTRON |
|---|---|
| Model | FFB 1 SL electronic comfort |
| Category | Remote Control |
| Language | English |
Explains how to activate and use the remote control unit, including power save mode.
Covers critical safety notes, supervision for vulnerable users, and general handling advice.
Details the procedure for installing the radio remote control system.
Specific steps for installing the FFB 1 SL transceiver module into the water heater.
Details how to select and save desired water temperatures using the remote.
How to set maximum flow rate for ECO function.
How to limit the maximum temperature for safety.
How to set maximum water volume for filling tasks.
Lists common faults, their causes, and recommended remedies for the remote control.
